A & B Flooring, Inc.A & B Flooring, Inc.

快乐飞艇单双

快乐飞艇预测

A & B System 5000 Urethane
A & B System 5000 Urethane

( Click image to enlarge )

A & B Flooring, Inc. systems 5000 is a light amber, moisture cure, single component polymer. This system has been formulated for outstanding wear and abrasion qualities. It maintains a glossy finish while increasing light reflectivity. This system is installed in layered coats of approximately 2-3 mils (dry film thickness) per coat. A & B Flooring recommends a three coat system for best results. This coating has a 50-60% solids content.

快乐飞艇分析软件

A & B System 5000 is a very effective coating in meeting the demands associated with industrial flooring applications. Examples: stamping plants, automotive plants, warehouses and most manufacturing facilities.

快乐飞艇现场开奖结果

  • All curing times are based on laboratory conditions.
  • Temperature, humidity, etc. will vary curing times.
  • Coverage 300-325 sq. ft. per gallon, roller or brush, 4-5 mils wet.
  • Recoat 4-6 hours at room temperature
  • Cure time: Light traffic 8 hours - Full cure 18-24 hours
  • Taber Abrasion: 12
  • Direct impact 160 in-16
  • ASTM 0-968 falling sand test: (amount of sand to remove one mil of coating))
    • A & B System 5000 39 liters
    • A & B System 4000 16 liters
    • A & B System 1000 16 liters
    • Acrylic urethane 13 liters
    • Acrylic Seal 4 liters

快乐飞艇网站

10% Acetic Acid
Fair
10% Citric Acid
Excellent
10% Lactic Acid
Excellent
10% Hydrocloric Acid
Fair
37% Hydrocloric Acid
NR
10% Nitric Acid
Fair
35% Phosphoric Acid
Excellent
80% Phosphoric Acid
Fair
10% Sodium Hydroxide
Excellent
25% Sulfuric Acid
Good
100% Methyl Ethyl Ketone
Poor
100% Gasoline
Excellent
100% A-1 Jet Fuel
Excellent
100% Brake Fluid
NR
100% Skydrol 500A
NR
100% Turpentine
Excellent
100% Grease
Excellent
100% Motor Oil
Excellent

* Based on 7 day cure at 75 degrees with 24 hour spot test.

快乐飞艇官网计划

Clear (colors will be darker in this product)

快乐飞艇直播

Attractive, seals concrete, prevents dusting, prevents oil penetration and staining, very high abrasion and impact resistance. Increases clean ability while prolonging life of concrete. A & B System 4000 is a thin film coating for maintaining a clean environment. A & B System 5000 is the finest thin film coating available for wear and abrasion resistance, while maintaining a high gloss.

Back to Top

Copyright © 2014 A & B Flooring, Inc., All Rights Reserved.Site Created by Thomas Web Solutions